How long does PirntGRIP last?
PrintGRIP is recommended to be replaced between 3 to 6 months of use. The material will always be tacky, BUT over time it will get more difficult to clear the lint off.
All articles
PrintGRIP FAQ
What type of material does PrintGRIP work on?
PrintGRIP adheres to most fabrics. Best on Cotton, Polyester, Cotton Blends, Poly Blends, and Tri Blends consisting of Poly/Cotton/Rayon. PrintGRIP does not adhere well to certain blends of Nylon/Elastin or Nylon/Spandex or combinations of those. If
Can I heat flash printGRIP?
Yes, printGRIP can be flashed. PrintGRIP has been tested to 970 degrees for 20 seconds with no signs of scorching.
What happens if I print in my PrintGRIP?
PrintGRIP can be cleaned off by using an on press cleaner.
Should I be worried about Ghost images or ink transferring through the shirt onto my PrintGRIP?
No, you may see Ghost or transfered images. They can be cleaned with an on press cleaner but as long as it is not affecting the stickiness you do not have to clean them off.
What can I do if my PrintGRIP is too sticky?
1. Dab the pallets with fleece or another fibrous material before printing. This will help to take away some of the stickiness and make pulling garments off of the pallets much easier. 2. Only clean the print area of the print grip. This will help to